PLC automation panels
PLC · HMI · I/O · pushbutton stations
The brain of a machine or line: PLC and I/O, safety relays, power supplies and operator controls, wired for easy maintenance.
Control panels · Coimbatore · Chennai · Bangalore
Custom control panels for industrial automation
PLC, servo, VFD, MCC and power panels designed, assembled and tested by our own team, then programmed and commissioned at your plant. One partner from drawing to start-up.
How we work
From drawing to commissioning, under one roof
Panels go wrong at the hand-offs: design to buyer, buyer to wireman, wireman to programmer. We keep every step in one team.
- Step 1
Design
Load list, electrical drawings, enclosure layout and bill of materials, shared for your approval.
- Step 2
Build
Enclosure, mounting, power and control wiring, ferruled and labelled to the drawings.
- Step 3
Test
Wiring checks and a powered test of PLC, HMI and drive programs before dispatch.
- Step 4
Commission
Installation, loop checks and start-up at your plant, then documentation and support.
Panel types
Panels we design and build
Every panel below is one of ours. Each is built to the machine or process it controls.
Servo & VFD drive panels
AC drives · servo drives · motion
Single and multi-axis drive panels for conveyors, pumps, fans, winders and motion machines, with correct cooling and cable segregation.
MCC & power distribution
MCC · PCC · feeders · starters
Motor control centres and power control panels with breakers, starters and metering, laid out for safe isolation and future feeders.
HMI operator consoles
HMI / industrial PC · meters · e-stop
Operator stations with touch screen or industrial PC, digital meters, indicators and an emergency stop, at a comfortable working height.
Control desks
Sloping desk · HMI · selectors · lamps
Desk-type consoles for process and utility plants, so one operator can watch and run the whole section from one place.
Marshalling, relay & I/O panels
Relays · terminals · SMPS · I/O
Field signals brought in, isolated and organised in one place, so wiring changes and fault finding take minutes, not hours.
Custom panel building
Built for your machine, not from a catalogue
We build control panels for automation and power distribution to the exact needs of each machine and plant, so they fit your existing systems today and leave room for what comes next.
- Built to your drawings, or designed by our engineers for your approval
- Tested in-house before dispatch, so start-up on site is quick
- PLC, HMI and drive programming by the same team that built the panel
- Ready for Industry X.0: panels can feed machine data to DigiFacto for live OEE and energy monitoring
Delta inside
Genuine Delta components, supplied and supported by us
As an authorised Delta channel partner we source, program and support the main components ourselves, so one call covers the panel and everything inside it.
- AS series PLCModular PLC for machines and lines
- DOP-100 HMITouch screens for operator panels
- MS300 AC driveCompact VFD for general machines
- C2000 Plus AC driveHigh-performance vector drive
- ASDA-B3 servoServo drives and motors for motion
- DPM-C520 power meterEnergy metering on every feeder
- DIAView SCADAPlant-wide monitoring and control
- DPM-C520 power meterEnergy metering on feeders
Applications
Where our panels work
Special-purpose machines
PLC, servo and HMI panels for machine builders and SPMs, delivered tested and ready to fit.
Process and utility plants
MCC, VFD and control-desk panels for pumps, compressors, blowers and process lines.
Conveyors and material handling
Multi-motor VFD panels with interlocks for conveyors, elevators and handling systems.
Robot cells
Cell control and safety panels that tie robots, grippers, guarding and conveyors together.
Energy and power quality
Metering and distribution panels, with Delta power meters for energy monitoring.
Training and lab rigs
PLC and drive trainer panels for colleges and Skill Forge Industry 5.0 labs.
Control panels
FAQ
Which control panels does Ausweg build?
PLC automation panels, servo and VFD drive panels, motor control centres (MCC), power control and distribution panels (PCC), HMI operator consoles, control desks, marshalling and relay panels, and custom panels for special-purpose machines.
Can you build a panel to our own drawings?
Yes. We build to your electrical drawings and component list, or our engineers prepare the design, drawings and bill of materials for your approval before we start.
Do you test panels before dispatch?
Yes. Every panel is wired and checked in-house before dispatch, and PLC, HMI and drive programs are tested with the panel powered up, so commissioning on site is quick.
Which brands do you use inside the panels?
As an authorised Delta channel partner we usually build with Delta PLCs, HMIs, AC drives, servo systems and power meters. We can also use the brands your plant already standardises on.
Do you program and commission the panel on site?
Yes. Our engineers program the PLC, HMI and drives, install and commission the panel at your plant in Tamil Nadu, Karnataka or elsewhere in South India, and support it after handover.
Where are your panels built?
Panels are designed and assembled by our team in Coimbatore, with sales and service support from our Chennai and Bangalore offices.
Get a free plant study and a personalised solution plan
Our engineers visit your plant, study your machines and goals, and recommend the right mix of automation, robotics and Industry X.0, with an estimated return.