Delta · CNC solutions

Delta CNC and assembly solutions

Delta machine solutions on one page: CNC controllers for machine tools, and a servo press and smart screwdriving system for assembly lines. Ausweg supplies, integrates and supports them in Coimbatore and Bangalore.

Request a quote Compare the range

4 products on one page
Selection, integration & support
Coimbatore · Bangalore

The range at a glance

Machine tools and assembly stations

NC5 CNC controller: 64-bit computing and ISO G-code with look-ahead; CNC solution for tapping, engraving and milling.
Servo press: Delta HMI, PLC, servo drive and motor in one system.
Smart screwdriving: servo motor, torque detection and software in one package.

Product	What it is
NC5 Series CNC Controller	CNC controller with 64-bit computing and ISO G-code look-ahead
CNC Solution	CNC package for high-speed tapping, engraving and milling
Servo Press	Electric servo press built from Delta HMI, PLC and servo
Smart Screwdriving System	Servo screwdriving with torque detection and software control

Product details

The full Delta CNC and assembly solutions range

CNC solutions

Delta NC5 Series CNC Controller

Experience precision redefined with Delta’s NC5 Series CNC Solution, powered by a next-generation CPU and 64-bit floating-point computing for unmatched…

Processor: Quad Core CPU
Memory: On Board DDR3 2 GB
Input Voltage Type: 24 VDC+ 15% / -10%
Power Consumption: 24 W / 36 W

Full specifications

Model	NC50E-FE	NC50E-WE	NC50EH-FE	NC500E-FIE-□	NC500E-LIE-□	NC500EH-FIE-□	NC510E-FSE-□	NC510EH-FSE-□
System
Processor	Quad Core CPU
Memory	On Board DDR3 2 GB
Input Voltage Type	24 VDC+ 15% / -10%
Power Consumption	24 W			36 W
Display
Touch Panel Size	N/A			8”Colors TFT		10.4”Colors TFT
Resolution	1,9201,080 (65,536)/ 1,280720 (65,536)			800*600 (65,536)
Peripherals
USB Interface	Host Type A * 4
Internet Interface	CIEEE 802.3 / 802.3u / 802.3ab 1 Gbps (Intel I210AT) * 2
Key	N/A			Right MDI, 6*10 keys Thin Film Bottom function key, 8 keys Thin Film		MOP, (14*3) + 2 keys Thin Film + EMG Button		N/A
Serial Communication Port
RS-485 Port	Isolated
Motion Control Interface
EtherCAT Field Bus	EtherCAT master controls up to 24 axes
System Storage Device
Embedded Memory	eMMC 4 GB (Non-expandable)
Memory Card	FAT32 / EXT4 (Only for Linux) (Expandable)
USB Drive	FAT32 (Expandable)
MISC
Batteries	Button cell battery (CR2032)
Architecture
Installation Method	Front Lock
Appearance Size W x H x D (mm)	270 x 183 x 60			400 x 320 x 121			400 x 220 x 92
Environment
Operating Temperature	0ºC ~ 50ºC
Storage Temperature	-20ºC ~ 60ºC
Relative Humidity	10% to 95% RH (non-condensing)
Certifications	⊂ ∈
Operating System Setting
System Tuning	Look ahead 4,000 blocks; 4,000 blocks process per second Minimum Command Precision 1 nm EtherCAT Cycle Time: 1 ms
User Command Tool
PLC	LD Ladder
Processing Programming Language	G Code Standard Lathe & Milling
HMI Interface	Human Machine Interface Programming & Macros
Motion Control
Max. Paths	2	2	4	2	2	4	2	4
Max. System Axes (Feed Axes + Spindles)	16	9	24	16	9	24	16	24
Max. Path Axes	12	9	16	12	6	16	12	16
Max. Path Interpolation Axes	4	3	5	4	4	5	4	5
System Max. Spindles	4	1	8	4	2	8	4	8
Milling	●	●	●	●		●	●	●
Lathe	●		●	●	●	●	●	●
(C/S-Axis) Compound Lathe & Milling	●		●	●	●	●	●	●
Sloping Plane			✽			✽		✽
RTCP			✽			✽		✽
Applicable Industries	General / 3C Processing	Woodworking Router	Advanced	General	Lathe	Advanced	General	Advanced
Advanced CAM Function	✽	✽	✽	✽	✽	✽	✽	✽
Note	(*): Optional

Request a quote →

CNC solutions

Delta CNC Solution

Delta’s CNC Solution features high-speed, high precision and superior surface finishing that enhances the speed, quality, stability of CNC machine tools.

Full specifications

Specifications
Built-in 32-bit high speed and high processing dual CPU for multi-tasking operation for enhanced performance High-speed communication servo drives and high performance, high resolution servo motors provide fully digital data transmission and improved noise immunity capabilities High speed and high precision motion control with the aid of Delta’s DMCNET high speed motion control system Multi-block look-ahead of acceleration/deceleration before interpolation for complete contouring control balances speed and precision to improve processing efficiency and ensure machining productivity A user-friendly Human Machine Interface for direct auto-gain tuning adjustment and parameter back-up of servo system Data synchronous management between a PC and an NC via Ethernet communication network CNC Soft software allows users to build custom screens for user-defined operation Serial I/O module for flexible system configuration and extension USB interface for easy data access, convenient data backup and parameter copies for fast installation Delta’s ECMC series servo motors for feed axes are equipped with high-resolution 20-bit motor encoder and up to 1 kHz speed response frequency Delta’s 3-axis synchronous ASDA-M servo system offers excellent multi-axis motion control with only one CPU and advanced synchronous gantry control PN power sharing of multiple axes for energy saving Built-in fine interpolation commands, friction compensation, and full-closed loop control functions For high-speed CNC tapping machinery, Delta’s ECMS series high-speed permanent magnet spindle motor features a rated speed of 6000 r/min and maximum speed of 12000 r/min Connecting to energy-saving C-Box for power storage absorbs brake energy regeneration and reduces electricity usage by more than 50%

Request a quote →

Assembly automation

Delta Servo Press

The Electric Servo Press integrates Delta’s self-developed key components such as the Human Machine Interface (HMI), Programmable Logic Controllers (PLC)…

Model Name: AM-ESP-E001-0-D / AM-ESP-E002-0-D / AM-ESP-E005-0-D
Max. Press Force (kgf): 100 / 200 / 500
Force Range (kgf): 1 ~ 100 / 2 ~ 200 / 5 ~ 500
Min. Increment / Decrement (kgf): 0.1 / 1

Full specifications

The Delta Electric Servo Press is a high-performance and energy-saving machine with no traditional press parts (e.g. flywheel, pneumatic cylinder, press motor, clutch, or others).The press adopts AC servo motors that propel a low-backlash ballscrew and press punch, along with sensor and control parts, to precisely adjust load and achieve high-repeatability processing quality. The machine features multiple control modes with flexible combinations to perform real-time press monitoring that not only helps reduce press yield rate and damage, but also saves cost.

Model Name	AM-ESP-E001-0-D	AM-ESP-E002-0-D	AM-ESP-E005-0-D	AM-ESP-E010-0-D	AM-ESP-E030-1-D	AM-ESP-E050-1-D
Max. Press Force (kgf)	100	200	500	1,000	3,000	5,000
Force Range (kgf)	1 ~ 100	2 ~ 200	5 ~ 500	10 ~ 1,000	30 ~ 3,000	50 ~ 5,000
Min. Increment / Decrement (kgf)	0.1				1
Max. Deviation (%)	±0.5 FS *3
Max. Stroke (mm)	100 / 200		100 / 200 / 300	100 / 200 / 300 / 400
Min. Increment / Decrement (mm)	0.001
Max. No-load Speed (mm/s)	500	30		270	200
Max. Press Speed (mm/s)	40 *4
Min. Increment / Decrement (mm/s)	0.001
Load Capacity of Press Punch (kg)	15		50		125
Repeatability of Position Control (mm)	± 0.01 *5
Power Supply	AC 220 V / 1Ø, 10 A				AC 220 V / 3Ø, 30 A
Scanning Time (ms)	< 1
Locking Method	Flange Locking
Over-press Protection	Yes
Dwell Time (hr)	> 24 hrs
Weight (kg)	12	12.5	30	33	110	125
Dimensions (L×W×H mm)	535×171.5×65		690×251×110	1,014.5×377×190
Surrounding Temperature	0 ~ 40°C
Humidity	20 ~ 90% (non-condensing)
Protection Level	IP20
HMI Language	English, Traditional Chinese, Simplified Chinese, Japanese
PC Software Language	English, Traditional Chinese, Simplified Chinese, Japanese
Unit	Force: N, kgf, lbf / Length: mm, inch

Note 1/2: Max. dimensions of different models for max. stroke length. Note 3: FS = Full Scale Note 4: Pressing speed is altered by pressing value Note 5: The equipment should be operated under constant temperature and pressure to maintain the precision of press repeatability, not absolute accuracy. Note 6: Suggested value. For specific applications, please contact Delta and distributors.

Request a quote →

Assembly automation

Delta Smart Screwdriving System

The Delta Smart Screwdriving System provides a one-stop solution for screw-tightening processes.

Input Voltage: 38 V DC
Torque Range (kgf·cm): 2.4 ~ 12 / 6 ~ 30 / 10 ~ 50
Precision: ±3%
Max. Rotation Speed: 2000 rpm / 1100 rpm / 700 rpm

Full specifications

Smart Screwdriver

Model	ECM-SD3-F1250 ECM-SD3-F1251	ECM-SD3-F3050 ECM-SD3-F3051	ECM-SD3-F5050 ECM-SD3-F5051	ECM-SD3-F7550 ECM-SD3-F7551
Input Voltage	38 V DC
Torque Range (kgf·cm)	2.4 ~ 12	6 ~ 30	10 ~ 50	15 ~ 75
Precision	±3%
Max. Rotation Speed	2000 rpm	1100 rpm	700 rpm	500 rpm
Tool Length	268.5 mm
Weight	560 g
Handheld Diameter	34 mm
Bit Specification	6.35 mm hex head for model names ending in 0 5 mm hex head for model names ending in 1
Operating Temperature	0°C (32°F) to 40°C (104°F)
Storage Temperature	0°C (32°F) to 60°C (140°F)
Humidity	0 ~ 90% RH (non-condensing)
IP Rating	IP40

Smart Screwdriving Controller

Controller	ASD-SD3021B-1 (Single-Tool Controller)	ASD-SD3041B-2 (Dual-Tool Controller)
Input Voltage	100 ~ 240 V AC
DC Bus Voltage	38 V DC
Rated Output Current	3.7 Arms
Max. Instantaneous Output Current	15 Arms
Rated Power Output	100 W / one tool	200 W / two tools
Screen Size	10.1” (Touchscreen)
Dimensions	200 x 252 x 121 mm

Request a quote →

Specifications are from Delta Electronics and may change. Ask us for the latest datasheet, price and availability.

Why buy Delta from Ausweg

More than a supplier

From Coimbatore, Bangalore and Chennai we help you choose, install and run the right product, and support it after go-live.

Selection & sizing

The right model and rating for your load, duty cycle and budget.

Programming & commissioning

PLC, HMI, drive and servo programming with on-site start-up.

Control panels

Panels designed, wired and tested in-house around Delta products.

Local support

Engineers, service and spares from our Coimbatore and Bangalore offices.

Related series

FAQ

Still unsure? Ask an engineer.

Can a Delta CNC retrofit an old machine?

Often yes. We assess the machine's mechanics and drives and propose a Delta controller and servo package.

Why use a servo press instead of a pneumatic press?

The servo controls force and position electrically, which gives more consistent pressing than air pressure and a system built from Delta HMI, PLC and servo components.

Get a free plant study and a personalised solution plan

Our engineers visit your plant, study your machines and goals, and recommend the right mix of automation, robotics and Industry X.0, with an estimated return.

Book a free plant study Call +91-7200115554

Delta CNC and assembly solutions

Machine tools and assembly stations

The full Delta CNC and assembly solutions range

Delta NC5 Series CNC Controller

Delta CNC Solution

Delta Servo Press

Delta Smart Screwdriving System

Smart Screwdriver

Smart Screwdriving Controller

More than a supplier

Selection & sizing

Programming & commissioning

Control panels

Local support

More from Delta

Delta compact AC drives (VFD)

Delta high-performance and application drives

Delta ASDA servo drives and motors

FAQ

Get a free plant study and a personalised solution plan